Studies on the Polymerization and Characterization of Carboxyl-Terminated Polybutadiene (Ⅰ). Effects of Initiator Concentration on Yields and various Characteristics

Carboxyl-Terminated Polybutadiene 의 중합 및 특성에 관한 연구 (제1보). 개시제농도가 수율 및 특성에 미치는 영향

  • Jung-Bu Kang (Hongneung Machine Industrial Corporation) ;
  • Kyung-Joon You (Hongneung Machine Industrial Corporation) ;
  • Suk-Ky Kwon (Hongneung Machine Industrial Corporation) ;
  • Dong-Young Oh (Department of Chemistry, Korea Advanced Institute of Science)
  • Published : 1980.10.30

Abstract

Carboxyl-terminated polybutadiene was prepared by free-radical polymerization using 4,4'-azobis-[4-cyano valeric acid] as an initiator and the effect of initiator concentration on polymer properties was investigated. Polymerization of the carboxyl-terminated polybutadiene was carried out varying the initiator concentration reacting with a constant butadiene concentration. The carboxyl weight percent decreased with increasing initiator concentration. The conversion was proportional to the square root of initiator concentration, giving a functionality greater than 2.0 which is consistent with the general tendency of free radical polymerization.

4,4'-azobis-[4-cyano valeric acid]를 개시제로 하여 라디칼 중합에 의해 carboxyl-terminated polybutadiene을 제조하고, 개시제의 농도가 중합체의 물성에 미치는 영향을 조사하였다. 부타디엔 농도를 일정하게 유지하고, 개시제 농도를 변화시켜 중합한 결과, 개시제농도가 증가함에 따라 카르복실기 함량이 감소하고 중합수율은 개시제농도의 1/2 제곱에 정비례하였으며, 관능도가 2.0을넘어 일반적인 라디칼 중합의 경향과 일치하였다.

Keywords

References

  1. J. Polym. Sci, A-1 v.10 S. F. Reed, Jr.
  2. Anal. Chem. v.31 R. S. Silas(et al.)
  3. J. Polym. Sci. v.6 D. H. Richards
  4. J. Polym. Sci. v.46 C. A. Uraneck;H. L. Hsieh;O. G. Buck
  5. J. Polyn. Sci. v.2 Katasumi(et al.)
  6. Nature v.178 M. Szwarc
  7. J. Am. Chem. Scs v.58 N. D. Scott(et al.)
  8. Ann. Chem. v.511 K. Ziegler(et al.)
  9. Trans. Faraday. Soc. v.32 A. Abkin;S. Modvedev
  10. Summary Report for the period of July 1, 1964-June 30 Carboxyl Terminated polyhydro carbons
  11. Trans. Faraday. Soc. v.56 C. H. Bamford(et al.)
  12. J. Polym. Sci. A-1 v.4 W. H. Stubbs(et al.)
  13. J. Polym. Sci. A-1 v.9 S. F. Reed, Jr.
  14. J. Polym. Sci. A-1 v.9 S. F. Reed, Jr.
  15. J. Polym. Scl. A-1 v.6 W. D. Stephens;C. R. McIntosh;C. O. Tayler
  16. U. S. Pat., 3, 235, 589 Morris. Berenbaum(et al.)
  17. U. S. Pat., 3, 285, 949 A. R. Siebert(et al.)
  18. J. Appl. Polym. Sci. v.19 J. N. Anderson(et al.)
  19. J. Polym. Sci. A-1 v.9 R. D. Law
  20. Journal of Chemical Education v.43 Jackcazes
  21. J. Appl. Polym. Sci. v.17 H. E. Adams(et al.)
  22. J. Appl. Polym. Sci. v.12 R. A. H. Strecker;D. M. French
  23. Makromol. Sci v.A3 A. H. Muenker;B. E. Hudson. Jr.