Acknowledgement
Supported by : 문교부
This study was conducted to test the harvesting operation of two kinds of rice varieties such as Milyang #15 and Tong-il with a imported two furrow Japanese combine and was performed to find out the operational accuracy of it, the adaptability of this machine, and the feasibility of supplying this machine to rural area in Korea. The results obtained in this study are summarized as follows; 1. The harvesting test of the Milyang #15 was carried out 5 times from the optimum harvesting operation was good regardless of its maturity. The field grain loss ratio and the rate of unthreshed paddy were all about 1 percent. 2. The field grain loss of Tong-il harvested was increased from 5.13% to 10.34% along its maturity as shown in Fig 1. In considering this, it was needed that the combine mechanism should be improved mechanically for harvesting of Tong-il rice variety. 3. The rate of unthreshed paddy of Tong-il rice variety of which stem was short was average 1.6 percent, because the sample combine used in this study was developed on basisof the long stem variety in Japan, therefore some ears owing to the uneven stem of Tong-il rice could nat reach the teeth of the threshing drum. 4. The cracking rates of brown rice depending mostly upon the revolution speed of the threshing drum(240-350 rpm) in harvesting of Tong-il and Milyang #15 were all below 1 percent, and there was no significance between two varieties. 5. Since the ears of Tong-il rice variety covered with its leaves, a lots of trashes was produced, especially when threshed in raw materials, and the cleaning and the trashout mechanisms were clogged with those trashes very often, and so these two mechanisms were needed for being improved. 6. The sample combine of which track pressure was
도입(導入)된 2조용(條用) Combine으로 통일(統一) 및 밀양(密陽) 15호(號) 수도품종(水稻品種)에 대(對)한 포장수확작업(圃場收穫作業)을 실시(實施)하여 Combine의 작업정도(作業精度) 작업성능(作業性能) 기계적(機械的)인 적응성(適應性)을 파악(把握)하고 한국(韓國)에서의 보급전망(普及展望)을 분석검토(分析檢討)한바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 장간종(長稈種)인 밀양(密陽)15호(號)에 대(對)한 Combine 수확작업(收穫作業)은 수확적기(收穫適期)로 부터 13일(日) 경과후(經過後)까지 5회(回)에 걸쳐 시기별(時期別)로 수확작업(收穫作業)을 실시(實施)한바 완숙도(完熟度)에 관계(關係)없이 수확작업(收穫作業) 양호(良好)하였으며 포장손실율(圃場損失率) 1% 미탈곡율(未脫穀率) 1%로 양호(良好)한 편(便)이었다. 2. 단간종(短稈種)인 통일(統一)에 대(對)한 Combine 수확작업(收穫作業)은 완숙기(完熟期)로 부터 수확시기(收穫時期)가 경과(經過)될 수록 포장손실(圃場損失)이 Fig 1과 같은 경향으로 5.13%에서 10.34%로 증가(增加) 하였으며 통일(統一)벼 수확(收穫)을 위(爲)하여는 기계적(機械的)인 개선(改善)이 많이 요망(要望)되었다. 3. 공시(供試)된 Combine은 장간종용(長稈種用)의 기종(機種)이어서 벼 이삭의 높이가 균일(均一)치 못한 단간종(短稈種) 통일(統一)벼는 탈곡부(脫穀部)의 공급(供給) Chain과 급실(扱室)과의 거리가 커서 급동(扱胴)의 급치(扱齒)에 못미치는 부분(部分)이 있어 미탈곡립율(未脫穀粒率)이 평균(平均) 1.6%이었다. 4. Combine 탈곡부(脫穀部) 급동(扱胴)의 회전수(回轉數)(240~350R.P.M)와 동할미(胴割米)의 관계(關係)는 통일(統一) 및 밀양(密陽)15호(號) 양품종(兩品種) 모두 동할율(胴割率)이 1% 미만(未滿)으로 유의차(有意差)가 없었다. 5. 통일(統一)벼는 벼 이삭이 잎속에 들어 있어 탈곡시(脫穀時) 검불의 양(量)이 많으며 특(特)히 생탈곡시(生脫穀時)는 검불량이 더 많이 생기므로 양곡부(揚穀部) 및 배진구(排塵口)에서 폐쇄현상(閉鎖現像)이 자주 일어남으로 선별(選別) 및 배진장치(排塵裝置)의 개선(改善)이 요망(要望)된다. 6. Combine의 접지압(接地壓)은
Supported by : 문교부