The Electrical Characteristics of PV Module by the Stress in accordance with Mechanical Weight Load
기계적 하중에 따른 스트레스로 인한 PV 모듈의 전기적 특성
- Kong, Ji-Hyun (Dept. of Electrical Engineering, Konkuk University) ;
- Ji, Yang-Geun (Dept. of Electrical Engineering, Konkuk University) ;
-
Kang, Gi-Hwan
(Photovoltaic Research Group, Korea Institute of Energy Research) ;
-
Yu, Gwon-Jong
(Photovoltaic Research Group, Korea Institute of Energy Research) ;
-
Ahn, Hyung-Geun
(Dept. of Electrical Engineering, Konkuk University) ;
-
Han, Deuk-Young
(Dept. of Electrical Engineering, Konkuk University)
- 공지현 (건국대학교 대학원 전기공학과) ;
- 지양근 (건국대학교 대학원 전기공학과) ;
-
강기환
(한국에너지기술연구원 태양광연구단) ;
-
유권종
(한국에너지기술연구원 태양광연구단) ;
-
안형근
(건국대학교 대학원 전기공학과) ;
-
한득영
(건국대학교 대학원 전기공학과)
- Published : 2009.11.19
Abstract
If the Photovoltaic(PV) Module should get physical load, the PV module will be warped according to elongation of the front glass and then micro-crack will be occurred in the heat sealed Solar Cell. This micro-crack drops output of the short circuit current and the open circuit voltage of the PV Module. This is because of increase of resistance component by micro-crack. Micro-crack at specific Solar Cell in the module reduces the durability of PV Module such as less output, Hot-Spot in the PV module caused by Solar Cell output mismatch, heat generating as resistance component caused by micro-crack. In this study, among some factors which effect to the output of crystalline PV Module, we will see how the micro-crack caused by mechanical stress effects to the electrical output of PV Module.