Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2009.05a
- /
- Pages.135-138
- /
- 2009
A Study on the Machining Characteristics of Tool Material for Cold Forging
냉간단조용 금형강의 절삭특성에 관한 연구
- Choi, W.S. ;
- Nam, J.H. ;
- Kang, C.W. ;
- Kin, W.G. ;
- Lee, I. ;
- Kwon, J.R. ;
- Park, S.Y. ;
- Mun, H.J.
- 최원식 (부산대학교 바이오산업기계공학과) ;
- 남중희 (대창 SF) ;
- 강창원 (부산대학교 바이오산업기계공학과) ;
- 김원구 (부산대학교 바이오산업기계공학과) ;
- 이인 (부산대학교 바이오산업기계공학과) ;
- 권주리 (부산대학교 바이오산업기계공학과) ;
- 박세영 (부산대학교 바이오산업기계공학과) ;
- 문희준 (부산대학교 바이오산업기계공학과)
- Published : 2009.05.07
Abstract
In this study we investigate the machining characteristics of tool material for cold forging by using the machining center. The test was in the SKD62 cold forging material by 2-edge endmill with cutting fluid. The coating conditions are depth of cut 1,2,3mm. WC-endmill, federate 20mm/min, cutting velocity 20m/min. The surface roughness increase as the depth of cut increase. Also cutting force increase whiles the depth of cut increase.