Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)
- 2009.07a
- /
- Pages.599_600
- /
- 2009
Design and manufacture of HTS current lead for 10kJ SMES
10kJ SMES용 고온초전도 전류리드의 설계 및 제작
- Park, Hae-Yong (Changwon National University) ;
-
Kim, Kwang-Min
(Changwon National University) ;
- Kim, Dae-Won (Changwon National University) ;
- Kim, A-Rong (Changwon National University) ;
-
Park, Min-Won
(Changwon National University) ;
-
Yu, In-Keun
(Changwon National University) ;
-
Kim, Seok-Ho
(Korea Electrotechnology Research Institute) ;
-
Sim, Ki-Deok
(Korea Electrotechnology Research Institute) ;
-
Sohn, Myung-Hwan
(Korea Electrotechnology Research Institute)
- 박해용 (창원대학교) ;
-
김광민
(창원대학교) ;
- 김대원 (창원대학교) ;
- 김아롱 (창원대학교) ;
-
박민원
(창원대학교) ;
-
유인근
(창원대학교) ;
-
김석호
(한국전기연구원) ;
-
심기덕
(한국전기연구원) ;
-
손명환
(한국전기연구원)
- Published : 2009.07.14
Abstract
In superconducting magnetic energy storage (SMES) systems, the current leads are usually divided into two parts. Normal metals like brass or copper are often used in the first part from the room temperature to the 1st stage of the cryocooler. Their dimensions were decided to minimize the conduction heat penetration and Ohm's heat generation. The second part down to the cryogenic coil is made of high temperature superconductor (HTS). HTS current leads can reduce the conductive heat penetration because they have poor thermal conductivity and generate no Ohm's heat generation. The brass current lead and the HTS current lead were designed and fabricated for application to the 10kJ class SMES system. The HTS current lead is 300A class. The HTS current lead was stacked with 2 HTS layers using the
Keywords