가스하이드레이트 탄성파 자료의 복소분석

Complex Analyses for Gas Hydrate Seismic Reflection Data

  • 도안 후이 히엔 (한국지질자원연구원 석유해저자원연구부) ;
  • 장성형 (한국지질자원연구원 석유해저자원연구부) ;
  • 김영완 (한국지질자원연구원 석유해저자원연구부) ;
  • 서상용 (한국지질자원연구원 석유해저자원연구부)
  • 발행 : 2008.10.16

초록

Gas hydrate has been paid attention to study for because: 1) it can be considered as a new energy resources; 2) one of reasons causing the instability of sea floor slope and 3) a factor to the climate change. Bottom simulating reflector (BSR) defined as seismic boundary between the gas hydrate and free gas zone has been considered as the most common evidence in the seismic reflection data for the gas hydrate exploration. BSR has several characteristics such as parallel to the sea bottom, high amplitude, reducing interval velocity between above and below BSR and reversing phase to the sea bottom. Moreover, instantaneous attribute properties such as amplitude envelop, instantaneous frequency, phase and first derivative of amplitude of seismic data from the complex analysis could be used to analyze properties of BSR those would be added to the certain properties of BSR in order to effectively find out the existence of BSR of the gas hydrate stability zone. The output of conventional seismic data processing for gas hydrate data set in Ulleung basin in the East sea of Korea will be used for complex analyses to indicate better BSR in the seismic reflection data. This result of this analysis implies that the BSR of the analyzed seismic profile is clearly located at the two ways time (TWT) of around 3.1 seconds.

키워드