Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2008.10a
- /
- Pages.304-307
- /
- 2008
Springback prediction of friction stir welded DP590 steel sheets considering permanent softening behavior
영구 연화 거동을 고려한 마찰교반용접(FSW) 된 DP강 판재의 탄성 복원 예측
- Park, T. ;
- Lee, W. ;
- Chung, K.H. ;
- Kim, J.H. ;
- Kim, D. ;
- Kim, Chong-Min (General Motors R&D Center) ;
- Okamoto, Kazutaka (Hitachi America LTd.) ;
- Wagoner, R.H. (Ohio State University) ;
- Chung, K.
- 박태준 (서울대학교 재료공학부) ;
- 이원오 (한국기계연구원 부설 재료연구소) ;
- 정경환 (포스코 기술연구소) ;
- 김준형 (삼성전자 정보통신총괄) ;
- 김대용 (한국기계연구원 부설 재료연구소) ;
- ;
- ;
- ;
- 정관수 (서울대학교)
- Published : 2008.10.09
Abstract
In order to evaluate the effect of permanent softening behavior on springback prediction, 2D-draw bending simulations were compared with experiments for friction stir welded DP590 steel sheets. To account fur the nonlinear hardening behavior, the combined isotropic-kinematic hardening law was utilized with and without considering the permanent softening behavior during reverse loading. Also, the non-quadratic orthotropic yield function, Yld2000-2d, was used to describe the anisotropic initial-yielding behavior of the base sheet while anisotropic properties of the weld zone were ignored for simplicity.
Keywords
- Permanent softening;
- Springback;
- Combined isotropic-kinematic hardening;
- Anisotropic yield function;
- Dual phase steel;
- Tailor welded blanks;
- Friction stir welding;
- 2-D draw bending tests