An experimental study on the evaluation of abrasion resistance for concrete surface coating materials by cruising vehicle

차량 주행에 따른 콘크리트용 바닥 마감재의 마모저항성 평가방법

  • 최은수 (한국건자재시험연구원, 충북대학교) ;
  • 김영근 (한국건자재시험연구원 방수보수보강센터) ;
  • 서상교 (충북대학교 건축공학과)
  • Published : 2008.04.24

Abstract

In the wheel tracking test to evaluate abrasion resistance for concrete surface coating materials applied parking lot, weight of the wheel, test temperature, scattered sand amount, wheel speed, etc. various test condition is used for reliable evaluating the abrasion resistance performance of surface coating materials and the results depends on the test condition. In this paper, we carried experimental study as following on abrasion resistance with 2kinds of different environmental conditions. - Commons : real car tire with 300kg of load, 5km/h of speed, 80,000 cycle. - Control A : no other deterioration condition - Control B : scattering 1.0g of sand per every 30rounds from 1m height.

주차장의 열화조건 중 가장 보편적으로 나타나는 코너 부위의 열화요인을 실험적으로 재현하여 바닥재의 성능을 비교 평가하여 바닥재의 신뢰성을 확보하기 위하여, 윤하중 시험을 실시하고 있다. 하지만 윤하중 시험의 시험 조건별 시험결과가 상이하여, 보다 명확한 시험조건의 설정이 필요하다. 이에 본 연구에서는 2가지 조건의 윤하중 시험을 실시하여, 보다 실제상황과 유사한 시험조건을 찾고자 한다. 1. 공통조건 - 실제 자동차 타이어에 300㎏의 하중을 가하여, 5㎞/h의 속도로 80,000 회전 시킨 후 마모도를 평가 2. 조건(A) - 별도의 (열화)조건을 주지 않고 마모도를 평가 3. 조건(B) - 30회마다 1회씩 1.0g의 표준사를 1m 높이에서 낙하

Keywords