한국금형공학회:학술대회논문집
- 한국금형공학회 2008년도 하계 학술대회
- /
- Pages.149-153
- /
- 2008
사출 금형의 벽두께 설계 방법의 고찰
A Study on the Wall Thickness Design for Injection Molding
- Hwang, S.J. (Department of Die & Mould Design, Seoul National University of Technology) ;
- Lyu, M.Y. (Department of Die & Mould Design, Seoul National University of Technology) ;
- Kim, D.W. ;
- Kim, S.Y. ;
- Shin, K.S. ;
- Kim, K.Y.
- 발행 : 2008.06.24
초록
The cavity of mold is exposed to high pressure during injection molding operation. Injection molded articles with deep depth are often demanded as design variety increases. Mold becomes weak and deformation increases as the mold depth increases. Thus the injection molds for deep depth articles should be designed to hold out high pressure or stress and large deformation. Through this study, equation for mold design was examined and suggested novel method to determine equation for mold design with deep depth. Novel equation developed in this study was consisted with cantilever and two points bending while previous equation was modified from just cantilever bending. The validity of novel equation was verified through computer simulation.
키워드