A study on micro-deburring of thin magnesium plate for application of electronic products
마그네슘 박판의 전자부품 적용을 위한 마이크로 디버링에 관한 연구
- Lee, Jung-In (Department of Mechanical Engineering, Pukyong National University) ;
- Kim, Tae-Wan (Department of Mechanical Engineering, Pukyong National University) ;
- Kwak, Jae-Seob (Department of Mechanical Engineering, Pukyong National University) ;
-
Jung, Young-Deug
(Department of Mechanical Engineering, Pukyong National University)
- Published : 2008.06.24
Abstract
Drill process is usually used to manufacture a industry about processing, Therefore, the burr problem is very significant, The burrs took place when drill process. And then, sometimes, the burrs are often caused of some problems during automatic such as no good quality products and having good surface roughness products. And also, this paper had some experiments using magnesium. Specially, the magnesium is one of the non-ferromagnetic materials. Magnesium has attracted a lot of interest for using the industry. They offer a possible alternative to steel and aluminum in automotive and aero industries to satisfy the lightweight requirement. also, magnesium has good specific strength and absorbs vibration in occurring working process. So, it has good quality of product processing. And then, it is one of the lightest materials being used to electronic product's cases and automotive because of lightweight and miniaturization. But this material has not widely used all of the industry due to its natural property. If the magnesium is contacted water, it will cause the exploration. But, nowadays many of people study magnesium to safe their experiment and to widely use this industry.