Improvement of Birefringence Characteristics of Injection-Molded Plastic Parts by Rapid Heating

급속 가열에 의한 사출성형품의 복굴절특성 개선

  • 박근 (서울산업대학교 기계설계 자동화공학부) ;
  • 김병훈
  • Published : 2007.05.10

Abstract

The present work focuses on the prediction of birefringence in injection-molded plastic part and its improvement by rapid mold heating. To calculate birefringence, flow-induced residual stress is computed through a fully three-dimensional injection molding analysis. Then the stress-optical law is applied from which the order of birefringence can be evaluated and visualized. The birefringence patterns are predicted for a rectangular plate with a variation of mold temperatures, which shows that the amount of molecular orientation and birefringence level decreases with an increase of mold temperature. The effect of mold temperature on the order of birefringence is also studied for a thin-walled rectangular strip, and compared with experimental measurements. Both predicted and experimental patterns of birefringence are in agreements on the observation that the birefringence level diminishes significantly when the mold temperature is raised to above the glass transition temperature.

Keywords