Lab-scale 반응기에서 RPF 열분해 가스의 가스화에 의한 합성 가스의 생성에 대한 연구

Production of synthesis gas by gasification of pyrolyzed gas of RPF in a lab-scale reactor

This paper provides RPF (Refuse Plastics Fuel) gasification characteristics for generating synthesis gas in gasfying reactor which was design in lab-scale. This research is carried out as an immediate work for making pyrolysis gas from RPF into energy resource. This study is consisted of experimental and numerical. The numerical study was accomplished from RPF pyrolysis data, and predicted the maximum operating conditions by STANJAN and FLEUNT. Based on results of STANJAN, it is found that the maximum point of $O_2/O_{2,stoich}$=20${\sim}$30, which is used as injection point of $O_2$. Experiment results shows that CO and $H_2$ were increased but THC was decreased as temperature was increased. It is estimated that the cracking of cracking of THC into CO and H2 is happened at a high temperature. It is observed that as steam was injected, production of CO and H2 were increased, then, H2 is dependent on the amount of injectionsteam.