대한기계학회:학술대회논문집 (Proceedings of the KSME Conference)
- 대한기계학회 2007년도 춘계학술대회A
- /
- Pages.572-577
- /
- 2007
THICKNESS OPTIMIZATION OF AN AUTOMOBILE BODY FOR NATURAL FREQUENCY MAXIMIZATION
- Panganiban, Henry (Mechanical Engineering Graduate School, Kunsan National University) ;
- Jang, Gang-Won (Department of Mechanical Engineering, Kunsan National University) ;
-
Chung, Tae-Jin
(Department of Mechanical Engineering, Kunsan National University) ;
- Choi, Young-Min (SDB Bellows, Co., Ltd.)
- 발행 : 2007.05.30
초록
The paper presents design optimization of an automobile body for dynamic stiffness improvement. The thicknesses of plates making-up the monocoque body of an automobile were employed as design variables for optimization and the objective was to increase the first torsional and bending natural frequencies. By allotting one design variable to each plate of the body, compared to previous works based on element-wise design variables, design space of optimization was reduced to a large extent and numerical instabilities such as checkerboard pattern was efficiently evaded. The method resulted to a considerable amount of increase in the automobile body's torsional and bending natural frequencies. Considering manufacturability of the optimized result, the converged values of plate thicknesses were approximated to commercially-available values by appropriately reflecting their design sensitivities.
키워드