한국소성가공학회:학술대회논문집 (Proceedings of the Korean Society for Technology of Plasticity Conference)
- 한국소성가공학회 2006년도 춘계학술대회 논문집
- /
- Pages.269-272
- /
- 2006
내구성을 고려한 후륜현가 장치의 하이드로포밍 공정 설계
Durability Based Design for Hydroforming process of Rear Suspension
초록
The hydroforming processing is a relatively new technology in comparison with conventional stamping process. The hydroforming processing makes torsion beam in rear suspension of automobile. The durability of torsion beam is very important characteristic that operate in an automobile. In order to optimize the hydroforming process and satisfy the durability, the hydroforming simulation which could control an axial compression and high internal pressure with computer simulation has to be operated. This paper is about an optimum design to improve the kinematic and compliance characteristics of a torsion-beam of suspension system. The result from finite element analysis shows that the forming and the durability are optimized. If there is effect of First pressure in hydroforming processing that gap is in the die tool, the prototype of tube is not satisfied on the durability test.