Blow forming characteristics of AZ31 sheet

AZ31 판재의 부풀림 성형 특성

  • 권용남 (한국기계연구원 재료기술연구소 소재성형연구센터) ;
  • 이영선 (한국기계연구원 재료기술연구소 소재성형연구센터) ;
  • 이정환 (한국기계연구원 재료기술연구소 소재성형연구센터)
  • Published : 2006.06.15

Abstract

In the present study, the blow forming characteristics of AZ31 sheet was investigated to test the feasibility of the practical application of wrought Mg alloys. Mg alloys have drawn a huge attention in the field of transportation and consumer electronics industries since it is the lightest alloy which could be industrially applicable. Most Mg alloy components have been fabricated by casting method. However, there have been a lot of research activities on the wrought alloys and their plastic forming process recently. Shallow cups for the small electronics cases have been stamped with warm die system. However, some technical issues will challenge Mg forming when large parts are considered with warm die system over $200^{\circ}C$. Most of all, thermal expansion of die system will deteriorate a die accuracy. On the other hand, blow forming does not have a problem with inaccuracy with die system. In this study, tensile tests were followed by blow forming at various temperature and pressure. AZ31 sheet showed a superplastic deformation behavior with extensive grain boundary sliding at the temperature above $300^{\circ}C$. However, the deformation behavior was likely to differ depending on stress condition.

Keywords