RF 스퍼터를 이용하여 미리 가열된 기판을 냉각하며 증착한 ZnO 박막의 c축 배향성 향상에 관한 연구

Improvement of c-axis orientation of ZnO thin film prepared on pre-heated substrate with cooling during RF sputter deposition

  • 박성현 (경원대학교 전기전자공학과) ;
  • 이순범 (경원대학교 전기전자공학과) ;
  • 신영화 (경원대학교 전기전자공학과) ;
  • 이능헌 (경원대학교 전기전자공학과) ;
  • 지승한 (경원대학교 전기전자공학과) ;
  • 권상직 (경원대학교 전기전자공학과)
  • Park, Sung-Hyun (Department of electric & electronics engineering in Kyungwon university) ;
  • Lee, Soon-Beom (Department of electric & electronics engineering in Kyungwon university) ;
  • Shin, Young-Hwa (Department of electric & electronics engineering in Kyungwon university) ;
  • Lee, Neung-Heon (Department of electric & electronics engineering in Kyungwon university) ;
  • Ji, Seung-Han (Department of electric & electronics engineering in Kyungwon university) ;
  • Kwon, Sang-Jik (Department of electric & electronics engineering in Kyungwon university)
  • 발행 : 2006.10.27

초록

In this paper, ZnO thin films were prepared on p-Si(100) by RF magnetron sputtering. Before the depostion, the substrates were pre-heated to 500, 400, 300, $200^{\circ}C$ or not. During the deposition, the substrates were cooled down naturally or kept and then the films were investigated by XRD(X-ray diffraction) and SEM (scanning micro scope). It is showed the most outstanding result that the film was prepared on the substrate were cooled from $400^{\circ}C$. When the substrate was cooled from a certain temperature during deposition, it could be improve the c-axis orientation and useful for application of SAW(surface acoustic wave) filter and FBAR(film bulk acoustic wave resonator) device.

키워드