대한전기학회:학술대회논문집 (Proceedings of the KIEE Conference)
- 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
- /
- Pages.2195-2196
- /
- 2006
PC 기반 전동기 고장 진단 시스템의 구현
Implementation of PC based Motor Fault Diagnosis System
- Doo, Seung-Ho (Department of Electrical and Electronic Engineering, Yonsei Univ.) ;
-
Park, Jin-Bae
(Department of Electrical and Electronic Engineering, Yonsei Univ.) ;
- Kwak, Ki-Seok (Department of Electrical and Electronic Engineering, Yonsei Univ.)
- 발행 : 2006.07.12
초록
This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server. Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.
키워드