대한용접접합학회:학술대회논문집 (Proceedings of the KWS Conference)
- 대한용접접합학회 2005년도 춘계학술발표대회 개요집
- /
- Pages.174-176
- /
- 2005
후육 고강도 Al 2519합금의 FSW 접합기술 및 접합부 특성(II)
FSW Process Optimization for Al 2519 Alloys and Its Joint Characteristics(II)
- 발행 : 2005.06.23
초록
On the basis of successful experiences and data from author's past experimental results of friction stir welding on thin aluminum plates, thick aluminum plate of high strength 2000 series has been carried out in this study. For various combination of rotating speed, welding speed and tool (RIWRC38-C) shape, the butt welded specimens has been prepared to check the metallurgical characteristics, hardness distributions and defects. From the results, feasible welding conditions have been obtained as 450 rpm rotating speed and 5 mm/min welding speed. Using these optimum welding parameters, 38.1mm-thickness A2519-T87 plates have been FSWelded in single pass. A good weld surface appearance and defects free weld zone has been observed in X-ray inspection. Softened region has been generated by dissolution of precipitates and coarsened microstructure in the stir zone after FSWeld.
키워드