Development of Brake Controller for fixed-wing aircraft using hardware In-the-Loop Simulation

  • Lee, Ki-Chang (Machine Control and Applications Group, Korea Electrotechnology Research Institute) ;
  • Jeon, Jeong-Woo (Machine Control and Applications Group, Korea Electrotechnology Research Institute) ;
  • Hwang, Don-Ha (Machine Control and Applications Group, Korea Electrotechnology Research Institute) ;
  • Kim, Yong-Joo (Machine Control and Applications Group, Korea Electrotechnology Research Institute)
  • 발행 : 2005.06.02

초록

Today, most fixed-wing aircrafts are equipped with the antiskid brake system. It can modulate braking moments in the wheels optimally, when an aircraft is landing. So it can reduce landing distance and increase safeties. The antiskid brake system for an aircraft are mainly composed of braking moment modulators (hydraulic control valves) and brake control unit. In this paper, a Mark IV type - fully digital - brake controller is studied. For the development of its control algorithms, a 5-DOF (Degree of Freedom) aircraft landing model is composed in the form of matlab/simulink model at first. Then, braking moment control algorithms using wheel decelerations and slips are made. The developed algorithms are tested in software simulations using state-flow toolboxes in matlab/simulink model. Also, a real-time simulation systems are made, which use hydraulic brake systems of a real aircraft, pressure control valves and its controller as hardware components of HIL(Hardware In-the-Loop) simulation. Algorithms tested in software simulations are coded into the controller and the real-time landing simulations are made in very severe road conditions. The real-time simulation results are presented.

키워드