Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference (한국전기전자재료학회:학술대회논문집)

The Korean Institute of Electrical and Electronic Material Engineers (한국전기전자재료학회)
권호 표지

Low Temperature Sintering Properties of $(Ba_{1-X}Sr_x)TiO_3$ Ceramics Added $Li_2CO_3$

$Li_2CO_3$가 첨가된 $(Ba_{1-X}Sr_x)TiO_3$의 저온소결 특성에 관한 연구

  • Jeon, So-Hyun (Dept. of material engineering, Kyungnam University) ;
  • Kim, In-Sung (Electric & Magnetic Devices Group, Korea Electrotechnology Research Institute) ;
  • Song, Jae-Sung (Electric & Magnetic Devices Group, Korea Electrotechnology Research Institute) ;
  • Min, Bok-Gi (Electric & Magnetic Devices Group, Korea Electrotechnology Research Institute) ;
  • Yoon, Jon-Do (Dept. of material engineering, Kyungnam University)
  • 전소현 (경남대학교 재료공학과) ;
  • 김인성 (한국전기연구원 전자기소자연구그룹) ;
  • 송재성 (한국전기연구원 전자기소자연구그룹) ;
  • 민복기 (한국전기연구원 전자기소자연구그룹) ;
  • 윤존도 (경남대학교 재료공학과)
  • Published : 2005.07.07
Download PDF
⟨ Previous Next ⟩

Abstract

Add $Li_2CO_3$ to $(Ba_{0.6}Sr_{0.4})$ $TiO_3$ powder to lower sitering temperature in this research, made thick film by tape casting method. Investigated about sitering temperature and physical properties that added $Li_2CO_3$ Even if lower sitering temperature about $200^{\circ}C$ adding $Li_2CO_3$ 10wt.%, density was near to 5.7$g/cm^3$ that is theoretical values, and crystal structure examined as perobeuseukaiteu senior after sintering.

Keywords