Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2005.10a
- /
- Pages.334-337
- /
- 2005
- /
- 2005-8446(pISSN)
Investigation into the development of deep drawing tools with small size for electronic parts utilizing the CAE and RP/RT technology
CAE 와 쾌속조형/쾌속툴링을 이용한 전자제품용 소형 금형의 개발에 관한 연구
-
Ahn D.G.
(Mecha. Eng. Dept. CSU)
;
- Lee S.H. (Graduate School, CSU) ;
- Kim M.S. (Graduate School, CSU) ;
- Han G.Y. (Mecha. Eng. Dept. CSU) ;
- Kim J.S. (Graduate School, CSU) ;
- Moon H.S. (Juyoung High Tech Co. Ltd) ;
- Yoon Y.S. (Juyoung High Tech Co. Ltd)
-
안동규
(조선대 기계공학과)
;
- 이상훈 (조선대 대학원) ;
- 김민수 (조선대 대학원) ;
- 한길영 (조선대 기계공학과) ;
- 김진석 (조선대 대학원) ;
- 문현수 ((주) 주영하이텍) ;
- 윤영석 ((주) 주영하이텍)
- Published : 2005.10.01
Abstract
The objective of this research works is to propose a rapid development methodology of small size deep drawing tools for electronic parts utilizing the technology combination of CAE and RP/RT. The technology is applied to the development of deep drawing tools with a drain shape. The final surface of tools is obtained from the evaluation of the formability using the CAE. In order to manufacture the physical prototype of tools fer try-out terming, several fabrication experiments are carried out for three types of rapid tool manufacturing technology. Through the fabrication experiments, the acceptable rapid manufacturing technologies of deep drawing tools with a small size have been proposed.
Keywords
- Deep drawing tools for electronic parts;
- Elasto-plastic stamping analysis;
- Rapid prototyping;
- Rapid tooling
- 전자제품용 성형금형;
- 탄소성 박판성형해석;
- 쾌속조형;
- 쾌속생산;