Evaluation of Structural Behaviour of High Performance Permanent Form with Stainless Steel Fiber

  • Sim Jong Sung (Dept. of Civil and Environmental Engineering in Hanyang Univ.) ;
  • Oh Hong Seob (Dept. of Civil Engineering in Jinju National University) ;
  • Ju Min Kwan (Candidate, Dept. of Civil and Environmental Engineering in Hanyang Univ.) ;
  • Shih Hyun Yang (Samsung Engineering and Construction, General Manager) ;
  • Han Jeong Jin (Samsung Engineering and Construction, General Manager) ;
  • Sohn Yushin (Samsung Engineering and Construction, Assistant Manager)
  • Published : 2005.05.01

Abstract

Nowadays, the stripping work of form has generated some problems such as increasing total constructing cost result from delayed work schedule by the stripping work of form and environmental issues by wasting the debonded form. According to recent research for form work, it has studied about permanent form to solve economic and environmental problem which is commented above. In this study, high performance permanent form method was developed and tested by adopting COM and TEN specimens adopted on the Compression and Tensile section then the structural behaviour was investigated. In the test result, the specimen adopted the form showed better structural performance than control specimen in the point of ductility, failure mode and ultimate load.

Keywords