Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2004.10a
- /
- Pages.120-123
- /
- 2004
Forming Simulation of Extru-Bending Process Using Multi-Billets
멀티빌렛을 사용한 압출굽힘가공의 성형 해석
Abstract
The bending phenomenon has been known to be occurred by the difference of velocity at the die exit. The difference of velocity at the die exit section can be obtained by the different velocity of billets inside die chamber after passing the multi-hole container. The curvature can be controlled by the two variables, the one of them is the different velocity of billets through the multi-hole container, the other is the difference of hole diameter. The bending phenomenon during extruding using four billets can be obtained by the difference of hole diameters in the multi-hole container or by the difference of relative velocity of billet inserted in the container. As results of DEFORM-3D analysis, it can be shown that bending can be obtained during extruding by the difference of relative velocity of two billets or by the difference of hole diameter, and the amount of curvature is increased by the difference of velocity and diameter. According to the shape of products, the curvature of rectangular section is bigger than the curvature of regular square section. And, it is estimated that, because the stress on the welding line is much higher than yield stress of material, the bonding of four billets can be obtained.
Keywords
- Extru-bending Process;
- Multi-hole Container;
- Relative Velocity;
- Hole Diameter;
- Multi-billets;
- Curvature;
- Rectangular Curved tube;
- DEFORM-3D