The study of silicon etching using the high density hollow cathode plasma system

  • Yoo, Jin-Soo (School of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Lee, Jun-Hoi (School of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Gangopadhyay, U. (School of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Kim, Kyung-Hae (School of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Yi, Jun-Sin (School of Electrical and Computer Engineering, Sungkyunkwan University)
  • 발행 : 2003.07.09

초록

In the paper, we investigated silicon surface microstructures formed by reactive ion etching in hollow cathode system. Wet anisotropic chemical etching technique use to form random pyramidal structure on <100> silicon wafers usually is not effective in texturing of low-cost multicrystalline silicon wafers because of random orientation nature, but High density hollow cathode plasma system illustrates high deposition rate, better film crystal structure, improved etching characteristics. The etched silicon surface is covered by columnar microstructures with diameters form 50 to 100nm and depth of about 500nm. We used $SF_{6}$ and $O_{2}$ gases in HCP dry etch process. This paper demonstrates very high plasma density of $2{\times}10^{12}$ $cm^{-3}$ at a discharge current of 20 mA. Silicon etch rate of 1.3 ${\mu}s/min$. was achieved with $SF_{6}/O_{2}$ plasma conditions of total gas pressure=50 mTorr, gas flow rate=40 sccm, and rf power=200 W. Our experimental results can be used in various display systems such as thin film growth and etching for TFT-LCDs, emitter tip formations for FEDs, and bright plasma discharge for PDP applications. In this paper we directed our study to the silicon etching properties such as high etching rate, large area uniformity, low power with the high density plasma.

키워드