한국정보디스플레이학회:학술대회논문집
- 2003.07a
- /
- Pages.493-496
- /
- 2003
Study on Resistivity Characteristics of Plastic ITO Film with the Multibarrier Film by the Bending Process
- Park, Jun-Back (Department of Electrical and Electronic Engineering (C-724), College of Engineering, Yonsei University) ;
- Lee, Yun-Gun (Department of Electrical and Electronic Engineering (C-724), College of Engineering, Yonsei University) ;
- Hwang, Jeoung-Yeon (Department of Electrical and Electronic Engineering (C-724), College of Engineering, Yonsei University) ;
-
Seo, Dae-Shik
(Department of Electrical and Electronic Engineering (C-724), College of Engineering, Yonsei University) ;
- Park, Sung-Kyu (Information Display Research Center, Korea Electronics Technology Institute) ;
- Moon, Dae-Gyu (Information Display Research Center, Korea Electronics Technology Institute) ;
-
Han, Jeong-In
(Information Display Research Center, Korea Electronics Technology Institute)
- Published : 2003.07.09
Abstract
Transmittance and resistivity is investigated according to bending of ITO (indium tin oxide)film with four other multi-barrier film. Transmission data of ITO film with four ITO films showed there was about large 90% transmission above 550 nm wavelength at three multi-barrier structures. But, both -side hard coated structure showed relatively low 75% transmission above 550 nm wavelength. Also, resistivity change of four other multi-barrier film showed there was the lowest change at oneside hard coated structure. Subsequently, with result of resistivity change according to position, it was known the resistivity change of the center increased rapidly than that of the edge.
Keywords