A Study on the Extru-Bending Process of the Angle Product with non-Symmetric "ㄱ" Section

비대칭 "ㄱ" 단면 앵글제품의 압출굽힘 가공에 관한 연구

  • 이경국 (부경대학교 대학원 정밀기계공학과) ;
  • 진인태 (부경대학교 기계공학부)
  • Published : 2003.10.01

Abstract

It was investigated that the "ㄱ" type angle product could be bended with a curvature during extrusion by extru-bending process. The bending process for the "ㄱ" type angle product can be developed by the hot metal extru-bending machine with the two punches moving in the different velocity. Because of non-symmetry of product, it is important to design the ruled surface contour of dies cavity for the welding and bending with two billets. So it is designed that the multi-hole container has two non-symmetric holes and non-symmetric contour of dies entrance. The results of the experiment show that "ㄱ" type angle product can be bended by the extrusion process and that the curvature of the product can be controlled by the velocity of punch and that the defects such as the distortion of section and the thickness change of the product and the folding and wrinkling of the product did not happen after the bending processing by the extrusion bending machine.

Keywords