Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)

The Korean Society for Technology of Plasticity and materials processing (한국소성∙가공학회)
권호 표지

A STUDY OF THE MULTI-ACTION FORGING DIE SET CONTROLLED BY THE SCREWS MECHANISM

  • Yang Jin-Bin (National Kaohsiung First University of Science and Technology Dept. of Mechanical and Automation Engineering) ;
  • Fang Jue-Jung (Zoeng Chang Industry Limited Co.)
  • Published : 2003.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

The multi-action forging process is one of developing directions of forging technologies. In this study, the multi-action die is designed and developed by the screws mechanism and the forging simulation is conducted by using plasticine to investigate the optimum conditions for the design of the screws. The results show the design variables are optimum when the diameter is 30 mm and the screw angle is $60^{\circ}$ for the upper screw rod and the outer diameter is 60 mm and the screw angle is $23.4^{\circ}$ for the lower screw tube. It makes the relative velocity between the upper punch and the die to be two to one, which is the expected condition. The material flow of the plasticine forgings is uniform. Therefore, it is feasible to use the screw set as the multi-action mechanism for controlling the movement of the multi-action forging die set.

Keywords