자속구속형 고온초전도 전류제한기의 사고초기 제한 전류변화 분석

Analysis for Variation of Limiting Current at Initial Fault Time in Flux-Lock Type SFCL

  • 임성훈 (전북대학교 전자정보공학부) ;
  • 최효상 (조선대학교 전기공학과) ;
  • 강형곤 (전북대학교 반도체 물성연구센터) ;
  • 고석철 (전북대학교 전자정보공학부) ;
  • 이종화 (전북대학교 전자정보공학부) ;
  • 한병성 (전북대학교 전자정보공학부)
  • Lim, Sung-Hun (School of Electronics&Information Engineering, Chonbuk National Uni.) ;
  • Choi, Hyo-Sang (Electrical Engineering Dept. Chosun Uni) ;
  • Gang, Hyeong-Gon (Chonbuk National Uni.) ;
  • Ko, Seok-Cheol (School of Electronics&Information Engineering, Chonbuk National Uni.) ;
  • Lee, Jong-Hwa (School of Electronics&Information Engineering, Chonbuk National Uni.) ;
  • Han, Byoung-Sung (School of Electronics&Information Engineering, Chonbuk National Uni.)
  • 발행 : 2003.07.21

초록

The fault current limiting characteristics at the initial fault time for flux-lock type high-Tc superconducting fault current limiter(SFCL) were investigated. The amplitude of initial fault current of the flux-lock type SFCL was dependent on the inductance ratio of coil 1 and 2. After fault current limiting mode was analyzed, we compared the calculated value with the experimental one for the initial fault current. The effect of initial fault current due to the inductance ratio of coil 1 and 2 on fault current limiting characteristics was discussed.

키워드