임의형상가공시스템의 적층 및 이송장치 동특성연구

Study of Dynamic Characteristics of Stacking and Transfer System for the Solid freeform fabrication System

  • 엄태준 (순천향대학교 기계공학과) ;
  • 주영철 (순천향대학교 기계공학과) ;
  • 민상현 (순천향대학교 전기전자공학과) ;
  • 김승우 (순천향대학교 정보기술공학부) ;
  • 공용해 (순천향대학교 정보기술공학부) ;
  • 천인국 (순천향대학교 정보기술공학부) ;
  • 방재철 (순천향대학교 신소재화학공학부)
  • 발행 : 2002.11.01

초록

This paper presents computer simulations of the stacking and transfer system for the fast freeform fabrication system. The stacking and transfer system is essential for the fast freeform fabrication system and its stable motion is very important fer the consistent stacking of the cut slices. The stacking and transfer system cane be modeled as a pneumatic system. The system consists of air compressor, the control valve, and the cylinder. The governing parameters have been changed and the simulation results are shown to predict the time response of the system. The results shows some parameters should be correctly tuned to obtain stable system response.

키워드