한국전기전자재료학회:학술대회논문집 (Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference)
- 한국전기전자재료학회 2002년도 하계학술대회 논문집
- /
- Pages.310-313
- /
- 2002
홈구조 실리콘 접합 경계면에서의 Void 제거를 위한 실리콘 직접접합 방법
The Removal Of Voids In The Grooved Interfacial Region Of Silicon Structures Obtained With Direct Bonding Technique
-
Kim, Sang-Cheol
(KERI) ;
-
Kim, Eun-Dong
(KERI) ;
-
Kim, Nam-Kyun
(KERI) ;
- Bahna, Wook (KERI) ;
- Soo, Gil-Soo (KERI) ;
-
Kim, Hyung-Woo
(KERI)
- 발행 : 2002.07.01
초록
Structures obtained with a direct boning of two FZ silicon wafers joined in such a way that a smooth surface of one wafer was attached to the grooved surface of the other were studied. A square net of grooves was made with a conventional photo lithography process. After high temperature annealing the appearance of voids and the rearrangement of structural defects were observed with X-ray diffraction topography techniques. It was shown that the formation of void free grooved boundaries was feasible. In the cases when particulate contamination was prevented, the voids appeared in the grooved structures could be eliminated with annealing. Since it was found that the flattening was accompanied with plastic deformation, this deformation was suggested to be intensively involved in the process of void removal. A model was proposed explaining the interaction between the structural defects resulted in "a dissolution" of cavities. The described processes may occur in grooved as well as in smooth structures, but there are the former that allow to manage air traps and undesirable excess of dislocation density. Grooves can be paths for air leave. According to the established mechanisms, if not outdone, the dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.