Effect of Cooling Rate on Mechanical Properties of Carbon/Nylon66 Composites

카본/나일론 복합재료의 냉각속도에 따른 기계적 특성변화

  • 홍순곤 (부산대학교 기계공학과 대학원) ;
  • 변준형 (한국기계연구원 복합재료그) ;
  • 황병선 (한국기계연구원 복합재료그) ;
  • 강범수 (부산대학교 항공우주공학과)
  • Published : 2001.05.01

Abstract

The objective of this research is to develop hybridized yarns for thermoplastic composites, and to examine tile effect of cooling rate on mechanical properties of the composites. The co-braided yarn utilizing carbon fibers as reinforcements and Nylon 66 fibers as matrix materials has been fabricated. Thermoplastic composites have been manufactured by the hot-press forming process. For the processing conditions, cooling rates of $-2.5^{\circ}C$/min and $-60^{\circ}C$/min have been considered. Three-point bending test and losipescu shear test were performed to investigate the effect of the cooling rate and the surface treatment of carbon fibers. SEM photographs were used to investigate the fracture surfaces of the tested samples. The cooling rate of $-60^{\circ}C$/min resulted in the higher strength and elastic modulus for bending and shear tests. The composites of the epoxy-sized carbon fibers showed the lowest strength due to the degradation of the sizing material during the thermoforming process.

Keywords