A Study on the Heater-Triggered Switching System for Charging of a HTS Magnet

고온초전도자석 충전용 히터트리거 스위칭 시스템에 관한 연구

  • 배덕권 (연세대학교 전기전자공학과) ;
  • 안민철 (연세대학교 전기전자공학과) ;
  • 최석진 (연세대학교 전기전자공학과) ;
  • 김영식 (연세대학교 전기전자공학과) ;
  • 김호민 (연세대학교 전기전자공학과) ;
  • 이찬주 (연세대학교 전기전자공학과) ;
  • 윤용수 (안산공과대학 전기과) ;
  • 이상진 (위덕대학교 전기공학과) ;
  • 신철기 (연세대학교 전기전자공학과)
  • Published : 2001.02.01

Abstract

The heater-triggered switching system for charging of a high temperature superconductor(HTS) is prepared by simulation and investigated its characteristic by experiment. heater-triggered switching system consists of two nickel-chrome alloy heater, an electromagnet and YBCO bulk HTS. There are three important parameters to generate the pumping-current in this system. The timing sequential control of two heters and electromagnet is an important factor to generate pumping-current in the YBCO bulk HTS. Thermal analysis of the switching part in YBCO bulk HTS according to the heater input current was carried out. Electromagnet of 0.6[T] and DC heater input current of 2.3[A] were optimally derived. In this experiment, the maximum pumping current is reaches about 12[A].

Keywords