대한전자공학회:학술대회논문집 (Proceedings of the IEEK Conference)

대한전자공학회 (The Institute of Electronics and Information Engineers)
권호 표지

Properties of reduced and quenched converter slag

  • Ko, In-Yong (School of advanced materials, Chonbuk National University) ;
  • Ionescu Denisa (Former graduate student, University of British Columbia) ;
  • T. R. Meadowcroft (Dept. of metals and materials, University of British Columbia)
  • 발행 : 2001.10.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Converter slag has some compositional similarities to portland cement. But it has no hydration properties due to it's quite high concentrations of FeO(20-35%), MnO(4-6.5%). So it is needed to reduce the concentrations of iron and manganese of converter slag to use as cement additives by enhancing it's hydration properties. In this study, converter slag was modified it's composition by mixing of silica, alumina and quenched BF slag and reduced in induction furnace and quenched in running water. The hydraulic properties and structures of modified and quenched converter slag are significantly changed depend on the amount and kinds of additives. The addition of alumina up to 10% and BFQ slag up to 20% by weight on converter slag was effective to enhance the hydraulic properties of modified and quenched slag. The addition of reduced and quenched converter slag up to 20% by weight in replacement of portland cement in mixing of concrete mortar were shown higher compressive strength than 100% cement concrete mortar.

키워드