Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2001.04a
- /
- Pages.513-518
- /
- 2001
- /
- 2005-8446(pISSN)
Design of a Drilling Torque Controller in a Machining Center
머시닝센터에서 드릴링 토크 제어기의 설계
Abstract
As the machining depth increases, the drilling torque increases and fluctuates and the risk of drill failure also increases. Hence, drilling torque control is very important to prevent the drill from failure. In this study, a PID controller was designed to control the drilling torque in a machining center. The plant including the feed drive system, cutting process, and spindle system was modeled for controller design. The Ziegler-Nichols rule was used to determine the controller gain and control action times. The root locus plot was used to tune the controller gain for a certain cutting condition. Also, suggested was a simple method to obtain the tuned controller gain for an arbitrary cutting condition not using the Ziegler-Nichols rule and root locus plot. The cutting torque control, performance of the designed controller and the effect of gain tuning on the control performance were examined.
Keywords