Proceedings of the Korean Society of Precision Engineering Conference (한국정밀공학회:학술대회논문집)
- 2000.05a
- /
- Pages.862-865
- /
- 2000
- /
- 2005-8446(pISSN)
A Study on the Surface Grinding using the Machining Center (I)
머시닝센터를 이용한 평면 연삭가공에 관한 연구(I)
- Lee, Seung-Man (Dept. of Eng. Sci. & Mech., KNUT) ;
- Seo, Young-Il (Kongkan Korea Co., Ltd.) ;
- Choi, Hwan (Dept. of Mech. Eng., KNUT) ;
- Lee, Jong-Chan (Dept. of Mech. Eng., KNUT) ;
- Jung, Sun-Hwan (Dept. of Mech. Eng., KNUT)
- Published : 2000.05.01
Abstract
The surface grinding of STD-11 was attempted on the machining center. Grinding experiments were performed at the various grinding conditions and the grinding force, machining error, grinding ratio, and surface roughness were measured. The experimental results indicate that the grinding ratio decreases as the table speed and depth of cut increase. The surface roughness of ground surface was not affected by the change of depth of cut. The surface roughness values obtained on the experiments were 0.02 ~ 0.03
Keywords