볼엔드밀 가공시 절삭깊이와 가공위치의 변화에 따른 표면정밀도

Surface Precision due to Change of Cutting Depth and Cutting Location when Ball End Milling

  • 박성은 (경남대 대학원) ;
  • 왕덕현 (경남대 기계자동화공학부) ;
  • 김원일 (경남대 기계자동화공학부) ;
  • 이윤경 (경남대 기계자동화공학부)
  • 발행 : 2000.10.01

초록

Ball end milling process is widely used in the die and mould manufacturing because of suitableness for the machining of free form surface. But, as ball end mill is long and thin, it is easily deflected by cutting force. In this study, Cutting force, tool deflection and surface precision was measured according to the change of depth and cutting location. Cutting force was acquired with tool dynamometer and a couple of eddy-current sensor measured tool deflection in x-y direction each. After machining, surface precision was measured with roundness tester and coordination measuring machine for sculptured surface angle change and cutting depth.

키워드