Proceedings of the International Microelectronics And Packaging Society Conference (한국마이크로전자및패키징학회:학술대회논문집)
- 2000.11a
- /
- Pages.89-92
- /
- 2000
LTCC Tape Characterization as Organic formulation
유기물 조성에 따른 LTCC 테입 특성 연구
- Lim, W. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Kang, B.H. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Yoo, Y.S. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Lee, Y.S. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Cho, H.M. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Lee, W.S. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI)) ;
- Kang, N.K. (Telecommunication Component Research Center, Microwave Material Group, Korea Electronics Technology Institute(KETI))
- 임욱 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 강병환 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 유찬세 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 이영신 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 조현민 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 이우성 (전자부품연구원 통신부품연구센터 고주파 재료 그룹) ;
- 강남기 (전자부품연구원 통신부품연구센터 고주파 재료 그룹)
- Published : 2000.11.01
Abstract
Non-aqueous tape casting of LTCC with PVB binder has been studied in a continuous tape casting machine. The aim of the study was to evaluate this type of system in the different Binder/Plasticizer and solid content compositions. Each four slurry compositions were used in the experiments with varied binder/plasticizer and solid content. All the slurries gave good quality tapes with smooth surfaces without blisters or pinholes. The highest mechanical properties was obtained for the B/P=3.0, powder content 70vol% composition from 52
테입 캐스터를 이용하여 바인더/가소제, 글말함량 비율이 다른 LTCC 테입을 제작한 후 특성평가를 하고자 하였다. 슬러리 조성은 서로 다른 바인더/가소제 그리고 분말함량에 따라 각각 4개 조성으로 구성하였다. 모든 슬러리에서 발포나 핀홀이 없는 미려한 표면을 갖는 테입을 얻을 수 있었다. 가장 우수한 기계적 특성 특성은 B/P=3.0, 분말함량 70vo1%인 두께 52
Keywords