Topographic Mapping using SAR Interferometry Method

레이다 간섭기법(SAR Interferometry)을 이용한 지형도 제작

  • 정도찬 (인하대학교 지리정보공학과) ;
  • 김병국 (인하대학교 지리정보공학과)
  • Published : 2000.06.09

Abstract

Recently, SAR Interferometry method is actively being studied as a new technic in topographic mapping using satellite imageries. it extract height values using two SAR imageries covering same areas. Unlike when using SPOT imageries, it isn't affected by atmospheric conditions and time. But it is difficult to process radar imageries and the height accuracy is very low where relief displacements are high. In this study, we produced DEM(Digital Elevation Model) using ERS-1, ERS-2 tandem data and analysed the height accuracy over 14 ground control points. The mean error in height was 14.06m. But when using airborne SAR data, it Is expected that we can produce more accurate DEM which will be able to ue used in updating 1/10,000 or 1/25,000 map.

위성영상을 이용하여 지형도를 제작하는 새로운 방법으로 레이다 간섭기법이 활발히 연구되고 있다. 레이다 간섭기법은 같은 지역에 대한 두 장의 SAR 영상을 이용하여 고도값을 추출하는 방법으로, 기존의 SPOT과 같은 광학영상에 비하여 날씨나 시간의 제약을 받지 않고 지형정보를 얻을 수 있다는 장점을 가지고 있다. 그러나 레이다 간섭기법을 이용하여 고도값을 추출하는 방법은 처리과정이 복잡하고 기복이 심한 지역에서의 수직위치 정확도가 떨어진다는 단점을 가지고 있다. 본 연구에서 ERS-1과 ERS-2의 tandem 모드 SAR 영상을 사용하여 수치표고모형을 작성한 후 14개의 지상기준점에 대한 수직위치 정확도를 분석한 결과 14.06m의 오차를 보였다. 그러나 항공탑재레이다 시스템의 영상을 사용하여 수치표고 모형을 제작하면 $2{\sim}5m$의 수직위치 정확도를 얻을 수 있으므로 1/10,000이나 1/25,000 축척 지형도의 수정, 갱신에 활용할 수 있으리라 기대된다.

Keywords