Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)
- 2000.07c
- /
- Pages.1590-1592
- /
- 2000
Tracking Resistance of Epoxy Mold Insulating Materials by the Rotating Wheel Dip Test
회전윤법에 의한 에폭시 몰드 절연재료의 내트래킹성 평가
-
Cho, Han-Goo
(Korea Electrictechnology Research Institute) ;
- Yun, Mun-Su (Korea Electrictechnology Research Institute) ;
- Park, Yang-Kwan (Sungkyunkwan Uni.)
- Published : 2000.07.17
Abstract
The time to tracking breakdown of treated filled specimen is longer than untreated filled specimen. And, after the RWDT, the surface of specimen by adding untreated filler appeared heavy erosion. It was found that the addition to surface treated filler. the better tracking resistance. In the RWDT, the breakdown specimen is not affected by the dry flashover voltage. despite the fact that the surface degradation of tracking test has different state on each specimen. This suggests that wet flashover voltage play an important role in evaluating of tracking and erosion on the surface degradation in tracking test. And, the flashover voltage of specimen under wet conditions are greatly affected by the salt concentration and degree of degradation by the RWDT. Because of hydrophobicity and degree of degradation by the RWDT, the flashover voltage of treated filled specimen is higher than that of untreated filled specimen. Different types of specimen may have different hydrophobicity and their surface state under contaminated conditions may not be the same. It is assumed that this phenomenon is related to the decrease in hydrophobicity of the surface of the materials.
Keywords