A Study on the Dry-Shrinkage Properties For Floor Mortar With Crack-Reducing

균열저감형 바닥마감전용 모르터의 건조수축특성 연구

  • 이종렬 (쌍용중앙연구소 콘크리트연구실 수석연구원) ;
  • 이웅종 (쌍용중앙연구소 콘크리트연구실) ;
  • 채재홍 (쌍용중앙연구소 콘크리트연구실) ;
  • 박경상 (쌍용중앙연구소 콘크리트연구실 실장) ;
  • 김기수 (쌍용중앙연구소 콘크리트연구실 실장)
  • Published : 1999.04.01

Abstract

The heating system of korea apartment house is called Ondol. The surface finishing mortar of this floor system typically used the cement based mortar, where the surface finishing mortar easily appears the crack. To order to crack control, the cement that added expansive additive used to reducing dry-shrinkage. For the surface finishing mortar, the types of shrinkage is known as plastic shrinkage, dry-shrinkage and autogenous This experimental study is to investigate the difference on dry-shrinkage of the cement that added expansive additives and OPC. The test method is varied the ration of water/cement (W/C) and the ratio of sand/cement(S/C). For OPC, The increase of the ratio of S/C is reduced dry-shirnkage but for the cement that added expansive additives, the increase of the ratio of S/C is augmented dry-shrinkage For OPC, The increase of the ratio of W/C is augmented dry-shrinkage but for the cement that added expensive, the increased of the ratio of W/C is reduced dry-shrinkage.

Keywords