A Non-Cirucular Contact Arc Model for Temper Rolling

  • Y.L. Liu (Instrumentation & Control Research Group, Technical Research Laboratories Pohang Iron & Steel Co., Ltd) ;
  • Lee, W.H. (Instrumentation & Control Research Group, Technical Research Laboratories Pohang Iron & Steel Co., Ltd) ;
  • Cho, K.J. (Instrumentation & Control Research Group, Technical Research Laboratories Pohang Iron & Steel Co., Ltd)
  • 발행 : 1999.08.01

초록

A mathematical model for the analysis of roll gap phenomena in strip temper rolling process is described. The mechanical peculiarities of temper rolling process, such as high friction value and non-circular contact arc, low reduction and non-negligible entry and exit elastic zones as well as central restricted deformation (preliminary displacement or sticking) zone etc., are all taken into account. The deformation of work rolls is calculated with the influence function method and arbitrary contact arc shape is permitted. The strip deformation is modeled by slab method and the entry and exit elastic deformation zones are included. The restricted deformation zone near the neutral point is also considered. The concept and the calculation method of limiting preliminary displacement are used to determine the length of the central restricted deformation zone. The comparison of the model results with the measured mill data is also made.

키워드