Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)
- 1997.11a
- /
- Pages.382-384
- /
- 1997
Partial Discharge Measurement in Power Cables using Switching Impulse Voltages
전력케이블에서 개폐충격파를 이용한 부분방전 측정
- Lee, J.S. (Hanyang Univ.) ;
- Jang, E. (Hanyang Univ.) ;
-
Koo, J.Y.
(Hanyang Univ.)
;
-
Kim, J.T.
(Daejin Univ.)
;
-
Cho, Y.O.
(KRRI)
;
- Kim, S.J. (KEPRI) ;
-
Song, L.K.
(KEPRI)
;
- Kim, J.Y. (KEPRI)
- 이전선 (한양대학교) ;
- 장은 (한양대학교) ;
-
구자윤
(한양대학교)
;
-
김정태
(대진대학교)
;
-
조연옥
(철도연구원)
;
- 김상준 (한전 전력연구원) ;
-
송일근
(한전 전력연구원)
;
- 김주용 (한전 전력연구원)
- Published : 1997.11.29
Abstract
On-site partial discharge test by use of AC voltage has been considered not to be appropriate for the extruded power cable due to their large capacitance depending on their lengths. Therefore, it is proposed, in this work, to use switching impulse voltage of which the front time is set from 1ms to 10ms. This newly proposed method enables us to simulate the 1/4 period of power frequency at 60 Hz and to obtain similar effect of AC voltage test. Our tentative results show that 51 voltage is proved to be an alternative method, replacing AC voltage, by which partial discharge was well produced from the artificial defects integrated in 22.9kV distribution power cables.
Keywords