대한의용생체공학회:학술대회논문집 (Proceedings of the KOSOMBE Conference)
- 대한의용생체공학회 1997년도 추계학술대회
- /
- Pages.590-592
- /
- 1997
Rapid Prototyping을 이용한 인체 모형 제작
Production of Implant Models using Rapid Prototyping
- 방철배 (서울대학교 산업공학과) ;
- 김남국 (비트컴퓨터 기술연구소) ;
- 이동혁 (서울대학교 의공학 교실) ;
-
김종효
(서울대학교 방사선학 교실)
;
-
강흥식
(서울대학교 방사선학 교실)
;
- 민병구 (서울대학교 의공학 교실) ;
- 김영호 (서울대학교 산업공학과) ;
-
강석호
(서울대학교 산업공학과)
- Bang, C.B. (Department of Industrial Engineering, College of Engineering, Seoul National University) ;
- Kim, N.K. (BIT Computer Co., Ltd., Technical Institute) ;
- Lee, D.H. (Department of Biomedical Engineering, College of Engineering, Seoul National University) ;
-
Kim, J.H.
(Department of Radiology, College of Medicine, Seoul National University)
;
-
Kang, H.S.
(Department of Radiology, College of Medicine, Seoul National University)
;
- Min, B.G. (Department of Biomedical Engineering, College of Engineering, Seoul National University) ;
- Kim, Y.H. (Department of Industrial Engineering, College of Engineering, Seoul National University) ;
-
Kang, S.H.
(Department of Industrial Engineering, College of Engineering, Seoul National University)
- 발행 : 1997.11.28
초록
Making physical models of human body is not only time-consuming but also very expensive since they are usually hand-made. This problem is doubled with implant fabrication because an implant is almost always custom-made. Recently, RP is emerging as an alternative, and many RP applications are proposed in the medical field. The major advantage of this approach is due to a significant reduction of both time and cost required or the production. However, the technology is not much in practical use yet, especially in Korea. In this paper, we provide a method of generating STL files that are the standard format to RP machines. The original data are obtained from two-dimensional slices of MRI/CT machine. Example bone models have been produced using a commercially available RP machine, and the results are presented.