Manufacturing Technique and Material Properties for 1/5-Scale Reinforced Concrete Frame Model

1/5 축소 3층 철근콘크리트 골조 모델의 제작기법 및 재료특성 연구

  • 이한선 (정회원, 고려대학교 건축공학과) ;
  • 우성우 (고려대학교 건축공학과) ;
  • 고동우 (고려대학교 건축공학과) ;
  • 허윤섭 (고려대학교 건축공학과) ;
  • 강귀용 (고려대학교 건축공학과)
  • Published : 1997.10.01

Abstract

This study presents the techniques to manufacture the model concrete and model reinforcement for the 1/5-scale 3-story reinforced concrete frame. The used model concrete has sufficient workability but shows a little lower strength than expected model steel was made of commercial $\phi$3.2mm and $\phi$2.0mm wire by using deforming device and vacuum tube electric furnace. The yield strength can be simulated but it was difficult to simulate the other properties. The load cell was specially manufactured to measure the shear force in the columns of the first story. The carrying frame and the hinge adapter of artificial mass are explained. The special problems in the process of construction of model are also dressed.

Keywords