Experimental research for the machining conditions of E. D. M

E.D.M 가공저간에 관한 실험적 연구

This research is a experimental study for the machining conditions of E. D. M. They were used Cu electrode and the various amplitude of current waves for the machining by E.D.M. By the analyse the characteristics of current, voltage, roughness of surface and over cut, the next results were obtained. E.D.M. machining time become to be more longer by the increasing the tensile stress. In case of NAK 55 as the composite resin, the machining time was more faster without the relationship for the tensile stress. And if it was more increased the amplitude of Ip, it has been more faster in the machining time and more poor in the surface roughness. But it was increased Ip with 5A, it has been increased 0.3 time in over cut. So, if we want to be the precision machining, the diameter of the electrode should be more smaller than the diameter of machined hole in workpiece with E.D.M.