Abstract
A Rapid Thermal Processing (RTP) system operated below $500^{\circ}C$ has been designed and constructed. It uses an optical pyrometer for measuring wafer temperature, the sensing range of pyrometer is from $2.0{\mu}m$ to $2.4{\mu}m$. To remove the interference effect by IR emitted from lamps an IR filter is adapted which uses water. The best condition for Al alloy using the RTP system is $425^{\circ}C$ for ten seconds. The RTP system uses many lamps for supplying enough power in processing wafer because the absorption wavelength range of IF filter is from $1.3{\mu}m$ to $4.0{\mu}m$. However, reproducibility and uniformity is reduced due to the difference of lamp characteristics. Therefore, for improving the reproducibility and uniformity new RTP system using one lamp is designed. The new RTP system uses a focusing mirror and it focuses the light of lamp. The curverture of the focusing mirror is controlled to supply uniform power in processing wafer. The result of computer simulation shows the possibility of new RTP system using one lamp.