Fabrication of Electrostatically Driven Comb Actuator Using (110) Oriented Si Anisotropic Etching

(110) 실리콘의 이방성 식각을 이용한 빗 모양 액츄에이터의 제작

  • Published : 1996.07.22

Abstract

An electrostatically driven comb actuator with $525{\mu}m$ height was fabricated using (110) Si anisotropic etching in the Potassium Hydroxide(KOH) solution. The etch-rate and etch-rate ratio are strongly dependent on the weight % and temperature of KOH solution. We developed the optimal condition for the anisotropic etching on (110) wafer with varying these conditions. The force that the comb-drive actuator generates is inversely proportional to the distance of gap and proportional to the height of the comb electrodes. The electrodes must have the high aspect ratio. The (110) Si anisotropic etching is very useful to get a high aspect ratio structure.

Keywords