대한전기학회:학술대회논문집 (Proceedings of the KIEE Conference)

대한전기학회 (The Korean Institute of Electrical Engineers)
권호 표지

IGBT를 사용한 고전압 스위치에 관한 연구

Study on High Voltage Switch Using IGBT

  • 박성수 (포항공과대학교 가속기연구소) ;
  • 김성철 (포항공과대학교 가속기연구소) ;
  • 조무현 (포항공과대학교 가속기연구소) ;
  • 남궁원 (포항공과대학교 가속기연구소)
  • Park, S.S. (Pohang Accelerator Laboratory, PLS/POSTECH) ;
  • Kim, S.C. (Pohang Accelerator Laboratory, PLS/POSTECH) ;
  • Cho, M.H. (Pohang Accelerator Laboratory, PLS/POSTECH) ;
  • NamKung, W. (Pohang Accelerator Laboratory, PLS/POSTECH)
  • 발행 : 1996.07.22
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PLS 2-GeV linac has 11 sets of high power klystron-modulator system as a main RF source for the beam acceleration. The modulators can provide 200-MW peak pulsed power(400-kV, 500-A) with a pulse width of $7.5{\mu}s$(ESW), a maximum pulse repetition rate of 120-Hz at the full power level. The DC power supply provides a 25-kV, 7-Adc and the charging system consists of a charging inductor, charging capacitor, and the diode for reverse current protection. The charged PFN voltage by a LC resonant charging method has two times of the DC high voltage and the pulsed power is delivered to the load by a thyratron switch. To reduced the press of high voltage lit thyratron switch, the command charging is the best method. In this article, the high voltage switch for the command charging method is tested to the start work and the system is presented with the experiment results of the trigger and operational characteristics.

키워드