주파수제어에 의한 형광램프용 다출력형 전자식 안정기의 설계

Frequency Control of an Electronic Ballast of Multiple Power Output for Fluorescent Lamps

  • 곽재영 (전남대학교 공과대학 전기공학과) ;
  • 송상빈 (전남대학교 공과대학 전기공학과) ;
  • 여인선 (전남대학교 공과대학 전기공학과)
  • 발행 : 1995.10.01

초록

This paper presents a new approach in the design of an electronic ballast for fluorescent lamps in the range of 10∼20W. The central point of the design lies in the equivalent concepts for a lamp and for the inverter part of an electronic ballast. The ballast, which adopts half-bridge inverter topology, is designed to adjust ifself to a predefined range of lamp power output by frequency control using MCU. At first, the circuit parameters were estimated using PSpice simulatio, and then were made varied according to the selection of an optimal frequency for each lamp. A series of experiments using fluorescent lamps of 11W, 15W, and 20W were carried out to verify the proposed design. As a result of the experiments, all the three lamps of different kind were run normally with the same ballast under consideration, And the characteristics on lamp starting and light output were satisfactory compared to existen single-output electronic ballasts.

키워드