Process Analysis and Design in Forming of Bearing Rings by the FEM(II)

유한요소법을 활용한 궤도륜의 프레스 성형공정 설계(II)

  • 변상규 (부산대학교 항공유주공학과) ;
  • 김태호 (부산대학교 항공우주공학과) ;
  • 강범수 (부산대학교 항공우주공학과) ;
  • 김완두 (한국기계연구원)
  • Published : 1995.03.01

Abstract

The analysis had been already completed to detect forming defects for the forming processes of C/R bearing rings. But some unpredicted problems were found through the experiments. So expert redesigned new forming processes to prevent the problems and new analysis was began according to the new processes to find faults for the processes. The forming processes consist of 1 for the outer ring. 6 inner ring. The thickness of metal sheet used is changed to 1.5mm from 1.6mm. Elasto-plastric finite element method is applied to involve the effect of spring back . The most representative alteration is forming of two predents to assist later forming . Thining and distribution of high residual stress are derived from the results of simulations. It is confirmed that the industry expert agree the possiblilty of defects dervied from the new FEM results.

Keywords